Step-by-Step guidelines to install Android CDC Driver manually on Windows XP, Vista. Tutorials Firmware Drivers Tools; ☰. These are the instructions to install Android CDC Driver on Windows Computer, including Windows XP, Windows. (to open device manager > Press Win + R to launch Run Command > In Run.

Holux RCV-3000 picture The Holux RCV-3000 is a simple, compact GPS data logger. It features 3 LEDs to show satellite signal, bluetooth connection, and battery charge. The internal memory can record up to 200,000 position data sets (newer version is 250,000), including longitude, latitude, date, time, speed and altitude. Logged data can be retrieved from the RCV-3000 via USB cable or Bluetooth wireless link using the NMEA 0183 V3.01 Interface Standard.

The RCV-3000 supports distance and time logging modes, kilometer and mile distance units. It is manufactured by Holux Technology, Inc., Hsinchu, Taiwan, R.O.C. GPSBabel main window mtkbabel TODO BT747 software software works on Linux but you need to install rxtx (serial and parallel I/O libraries supporting Sun's CommAPI​) package to use it. See the for general details. Microsoft Windows There are two ways to connect to this device — USB and Bluetooth. Each requires a slightly different setup. You do not need to set it up both ways, either is sufficient, but USB is much faster for downloading logged data points than Bluetooth — 480 Mbps (USB 2.0) vs.

721 kbps (Bluetooth 1.2 SPP, class 2 up to 10 meters). Additionally, since there are various Bluetooth implementations ('stacks'), you may have to adjust these instructions for particular software-hardware combination. Bluetooth By default, the Holux RCV-3000 has Bluetooth turned on. You can see that Bluetooth connection to this device are ready when you can see the blue LED on the device case is blinking. There does not seem to be any success connecting to Windows 10 using bluetooth (Oct 2018)(If you have managed this feel free to explain how). Have your computer search for Bluetooth devices.

The following instructions are how I did it in Microsoft Windows on my Dell Latitude with the Broadcom??? Bluetooth stack. Your Bluetooth applications will likely be slightly different. • Go to My Computer and open up 'My Bluetooth Places' • Select 'Add Bluetooth Device' from the 'Bluetooth' menu • Check to make sure the drop-down menu says 'Show All Devices' and you should see the Holux device listed • Select it and enter '0000' as the passcode for pairing • Check the box next 'SPP Slave' and click 'Configure'.

• Name the connection whatever you'd like, but make sure to note the COM port listed here The RCV-3000 should now be connected. When you want to connect in the future, right-click on the Bluetooth tray icon and select Quick Connect --> Bluetooth Serial Port -->Pechenje cherez myasorubku so smetanoj. Holux_RCV-3000.

Please note that transferring data points over Bluetooth is significantly slower than over USB due to limitations of the NMEA Interface Standard. Also, if the battery in the RCV-3000 is dead, you can power it via USB, even while using Bluetooth connectivity. USB • Download the driver for the LOCOSYS GPS Serial Interface driver: • Search for the 'Driver Program-Driver for Windows XP/7/8/8.1/10: Direct link: • Create the C: holux-drivers folder and copy in this folder the 4652731.zip zip file. • Unzip the 4652731.zip zip file in C: holux-drivers folder • Plug in your Holux with a MiniUSB cable. BT747 picture Improve the accuracy By default, the device use only the GPS Satellits and not other satellits with DGPS to improve accuracy from. BT747 picture Mac OS X TODO Can not test it. For Mac OS X, take a look at to find the steps to follow.

Firmware Actually, September 2016, no new firmware release is available for this device. Software hacks Actually, none.